Cart

.308 Winchester Semi-Auto Reloading Brass: 308SARB F

Ideal for loading Flat-Base Bullets and shooting in Semi-Automatic rifles

.308 Remington Fully Processed Brass Cartridges for Reloading: 308SARB F

Guaranteed once-fired 100% 7.62 x 51 NATO military brass; we buy directly from the military through auctions.

$24.00$65.00

Clear selection
Email your friend

Ideal for loading and shooting in Semi-Automatic rifles; necks have a slight flare to accommodate loading with flat base bullets; boat tail bullets work just fine too!

.308 Winchester Fully Processed Brass Cartridges for Reloading: 308SARB F

All same headstamp: All of our .308 fully processed brass is sorted by manufacturer and headstamp.

Guaranteed once-fired 100% 7.62 x 51 NATO military brass; we buy directly from the military through auctions.

See the “Our Process” page for a complete description of our processing. Here’s what we do:

  • tumble clean in precision ceramic media, then hand sort by manufacturer and year
  • de-prime and full-length size; we use a .302″ diameter expander ball so the neck is expanded to .302″ inside diameter to give .006″ tension on the bullet
  • swage the primer pocket so it will accept a new primer
  • trim the case to a uniform overall length; 2.005” +/- .003 (98% are within .002″)
  • put a very slight flair in the case mouth to make it easier to load flat-based bullets; boat tail bullets work just fine too
  • tumble them in stainless steel pins to clean out the primer pocket and the flash hole, as well as the inside of the case
  • weigh and package in bags of 100 and 250

For you single stage reloaders, you can skip lubing and sizing. All cases are full-length sized and ready to load. We check them on a regular basis using a Dillon case gauge.

For those of you who use a multi-stage press, you can skip lubing and sizing too. Plus, the primers go in smoothly, and are nice and snug.

308SARB F was developed for shooting in magazine-fed rifles. The slightly flared case mouth makes it easier to seat all bullets, especially flat-base bullets. Of course, the flare works fine for boat tails too. So you can use this brass with any bullets. The flare is so slight that it mostly disappears after seating the bullet.

The neck tension on our 308SARB F is .006” (the inside diameter of the case neck is .302” which puts a .006″ squeeze on the bullet). The increased neck tension will hold the bullet in place when the magazine gets knocked around or when you extract an unfired cartridge from the chamber. A slight crimp is recommended when using any brass in a semi-automatic rifle.

Yes, 308SARB F will work just fine in bolt-action rifles, although many long range shooters prefer a lighter neck tension for better accuracy.

Sold in bags of 100 and 250 by weight.

Weight N/A
Packages

Bag of 100, Bag of 250

Manufacturer/Year

Federal Cartridge Corp 2005 (FC 05), Lake City 2013 (LC 13)

Reviews

There are no reviews yet.

Be the first to review “.308 Winchester Semi-Auto Reloading Brass: 308SARB F”

Newsletter

No Notify!