Cart

.223 Remington Bolt-Action Reloading Brass for Flat-Based Bullets: 223BARB F

5.00 out of 5 based on 1 customer rating
(1 customer review)

Ideal for loading Flat-Based Bullets and shooting in Semi-Automatic rifles

.223 Remington Fully Processed Brass Cartridges for Reloading: 223BARB F

Guaranteed once-fired 100% 5.56 x 45 NATO military brass; we buy directly from the military through auctions.

$18.50$85.00

Clear selection
Email your friend

Ideal for loading Flat-Based Bullets and shooting in Bolt Action rifles

.223 Remington Fully Processed Brass Cartridges for Reloading: 223BARB F

Guaranteed once-fired 100% 5.56 x 45 NATO military brass; we buy directly from the military through auctions.

See the “Our Process” page for a complete description of our processing. Here’s what we do:

  • tumble clean in precision ceramic media, then hand sort by manufacturer and year
  • de-prime and full-length size; we use a .223″ diameter expander ball so the neck is expanded to .223″ inside diameter to give .001″ tension on the bullet
  • swage the primer pocket so it will accept a new primer
  • trim the case to a uniform overall length; 1.750” +/- .003 (98% are within .002″)
  • put a very slight flair in the case mouth to make it easier to load flat-based bullets
  • tumble them in stainless steel pins to clean out the primer pocket and the flash hole, as well as the inside of the case
  • weigh and package in bags of 100 and 500

For you single stage reloaders, you can skip lubing and sizing. All cases are full-length sized and ready to load. We check them on a regular basis using a Dillon case gauge.

For those of you who use a multi-stage press, you can skip lubing and sizing too. Plus, the primers go in smoothly, and are nice and snug.

The neck tension on our 223BARB F is .001” (the inside diameter of the case neck is .223”, so there’s .001″ squeeze on a .224″ bullet).

223BARB F was developed for loading with flat-based bullets and shooting in bolt action rifles, although it will also work fine when loading with boat-tail bullets.

The slightly flared case mouth makes it easier to seat all bullets, especially flat-base bullets.

And yes, it will also work just fine in semi-automatic rifles. A good crimp is recommended when using any brass in a semi-automatic rifle.

Sold in bags of 100 and 500 by weight.

Packages

Bag of 100, Bag of 500

Manufacturer/Year

Lake City 2009 (LC 09)

1 review for .223 Remington Bolt-Action Reloading Brass for Flat-Based Bullets: 223BARB F

  1. deb-admin
    5 out of 5

    deb-admin:

    Great for reloading!

Add a review

Newsletter

No Notify!